Sinec H1

Sinec H1 is an Industrial Ethernet communications protocol that provides the transport layer function widely used in automation and process control applications.^[1]^[2] The protocol was developed by Siemens and is used mainly for control applications. It has large bandwidth and is well suited to the transmission of large volumes of data.

It is used as part of the control infrastructure of CERN^[3] and LHC.^[4]

References

^ Becker, K.; Flaschka, E. (1990). "Sinec concept and implementation". Sensors and Actuators A: Physical. 25 (1–3): 125–128. doi:10.1016/0924-4247(90)87019-F.
^ SINEC H1, ein Bussystem fuer die Prozesskommunikation. T Kersting, R Sommer, H Stier – Siemens Energie und Automation, 1985. pp. 152-156. (in German)
^ Ninin et al. (1997) Industrial Control Systems for the Technical Infrastructure at CERN. In Proceedings of the International Conference on Accelerator and Large Experimental Physics Control Systems. http://www.aps.anl.gov/News/Conferences/1997/icalepcs/paper97/p133.pdf
^ Bray et al. (1995) The Control and Data Acquisition of the LHC Test String. In Proceedings of International Conference on Accelerator and Large Experimental Physics Control Systems, Chicago, IL, USA, 30 Oct – 3 Nov 1995. https://cds.cern.ch/record/293232?ln=no

External links

This computer networking article is a stub. You can help Wikipedia by expanding it.

Zdroj:https://en.wikipedia.org?pojem=Sinec_H1
Text je dostupný za podmienok Creative Commons Attribution/Share-Alike License 3.0 Unported; prípadne za ďalších podmienok. Podrobnejšie informácie nájdete na stránke Podmienky použitia.

[1] Becker, K.; Flaschka, E. (1990). "Sinec concept and implementation". Sensors and Actuators A: Physical. 25 (1–3): 125–128. doi:10.1016/0924-4247(90)87019-F.

[2] SINEC H1, ein Bussystem fuer die Prozesskommunikation. T Kersting, R Sommer, H Stier – Siemens Energie und Automation, 1985. pp. 152-156. (in German)

[3] Ninin et al. (1997) Industrial Control Systems for the Technical Infrastructure at CERN. In Proceedings of the International Conference on Accelerator and Large Experimental Physics Control Systems. http://www.aps.anl.gov/News/Conferences/1997/icalepcs/paper97/p133.pdf

[4] Bray et al. (1995) The Control and Data Acquisition of the LHC Test String. In Proceedings of International Conference on Accelerator and Large Experimental Physics Control Systems, Chicago, IL, USA, 30 Oct – 3 Nov 1995. https://cds.cern.ch/record/293232?ln=no

[1]

[2]

[3]

[4]

v t e Automation protocols
Process automation	AS-i BSAP CC-Link Industrial Networks CIP CAN bus CANopen DeviceNet ControlNet DF-1 DirectNET EtherCAT Ethernet Global Data (EGD) Ethernet Powerlink EtherNet/IP Factory Instrumentation Protocol FINS FOUNDATION fieldbus H1 HSE GE SRTP HART Protocol Honeywell SDS HostLink INTERBUS IO-Link MECHATROLINK MelsecNet Modbus Optomux PieP PROFIBUS PROFINET RAPIEnet SERCOS interface SERCOS III Sinec H1 SynqNet TTEthernet
Industrial control system	MTConnect OPC DA OPC HDA OPC UA
Building automation	1-Wire BACnet BatiBUS C-Bus CEBus DALI DSI DyNet EnOcean EHS EIB FIP KNX LonTalk Modbus OpenTherm oBIX VSCP X10 xAP xPL Z-Wave Zigbee
Power-system automation	IEC 60870 IEC 60870-5 IEC 60870-6 DNP3 Factory Instrumentation Protocol IEC 61850 IEC 62351 Modbus PROFIBUS
Automatic meter reading	ANSI C12.18 IEC 61107 DLMS/IEC 62056 M-Bus Modbus Zigbee
Automobile / Vehicle	AFDX ARINC 429 CAN bus ARINC 825 SAE J1939 NMEA 2000 FMS Factory Instrumentation Protocol FlexRay IEBus J1587 J1708 Keyword Protocol 2000 Unified Diagnostic Services LIN MOST SENT (SAE J2716) VAN Cyphal

See also

References

External links