Brake-specific fuel consumption (BSFC) is a measure of the fuel efficiency of any prime mover that burns fuel and produces rotational, or shaft power. It is typically used for comparing the efficiency of internal combustion engines with a shaft output.

It is the rate of fuel consumption divided by the power produced. In traditional units, it measures fuel consumption in pounds per hour divided by the brake horsepower, lb/(hp⋅h); in SI units, this corresponds to the inverse of the units of specific energy, kg/J = s²/m².

It may also be thought of as power-specific fuel consumption, for this reason. BSFC allows the fuel efficiency of different engines to be directly compared.

The term "brake" here as in "brake horsepower" refers to a historical method of measuring torque (see Prony brake).

Calculation

The brake-specific fuel consumption is given by,

${\displaystyle {\text{BSFC}}={\frac {r}{P}}}$

where:

${\displaystyle r}$ is the fuel consumption rate in grams per second (g/s)

${\displaystyle P}$ is the power produced in watts where ${\displaystyle P=\tau \omega }$ (W)

${\displaystyle \omega }$ is the engine speed in radians per second (rad/s)

${\displaystyle \tau }$ is the engine torque in newton metres (N⋅m)

The above values of r, ${\displaystyle \omega }$, and ${\displaystyle \tau }$ may be readily measured by instrumentation with an engine mounted in a test stand and a load applied to the running engine. The resulting units of BSFC are grams per joule (g/J)

Commonly BSFC is expressed in units of grams per kilowatt-hour (g/(kW⋅h)). The conversion factor is as follows:

BSFC = BSFC × (3.6 × 10⁶)

The conversion between metric and imperial units is:

BSFC = BSFC × 608.277

BSFC = BSFC × 0.001644

Relation to efficiency

To calculate the actual efficiency of an engine requires the energy density of the fuel being used.

Different fuels have different energy densities defined by the fuel's heating value. The lower heating value (LHV) is used for internal-combustion-engine-efficiency calculations because the heat at temperatures below 150 °C (300 °F) cannot be put to use.

Some examples of lower heating values for vehicle fuels are:

Certification gasoline = 18,640 BTU/lb (0.01204 kW⋅h/g)

Regular gasoline = 18,917 BTU/lb (0.0122222 kW⋅h/g)

Diesel fuel = 18,500 BTU/lb (0.0119531 kW⋅h/g)

Thus a diesel engine's efficiency = 1/(BSFC × 0.0119531) and a gasoline engine's efficiency = 1/(BSFC × 0.0122225)

Operating values and as a cycle average statistic

Any engine will have different BSFC values at different speeds and loads. For example, a reciprocating engine achieves maximum efficiency when the intake air is unthrottled and the engine is running near its peak torque. The efficiency often reported for a particular engine, however, is not its maximum efficiency but a fuel economy cycle statistical average. For example, the cycle average value of BSFC for a gasoline engine is 322 g/(kW⋅h), translating to an efficiency of 25% (1/(322 × 0.0122225) = 0.2540). Actual efficiency can be lower or higher than the engine’s average due to varying operating conditions. In the case of a production gasoline engine, the most efficient BSFC is approximately 225 g/(kW⋅h), which is equivalent to a thermodynamic efficiency of 36%.

An iso-BSFC map (fuel island plot) of a diesel engine is shown. The sweet spot at 206 BSFC has 40.6% efficiency. The x-axis is rpm; y-axis is BMEP in bar (bmep is proportional to torque)

Engine design and class

BSFC numbers change a lot for different engine designs, and compression ratio and power rating. Engines of different classes like diesels and gasoline engines will have very different BSFC numbers, ranging from less than 200 g/(kW⋅h) (diesel at low speed and high torque) to more than 1,000 g/(kW⋅h) (turboprop at low power level).

Examples for shaft engines

The following table takes values as an example for the specific fuel consumption of several types of engines. For specific engines values can and often do differ from the table values shown below. Energy efficiency is based on a lower heating value of 42.7 MJ/kg (84.3 g/(kW⋅h)) for diesel fuel and jet fuel, 43.9 MJ/kg (82 g/(kW⋅h)) for gasoline.

Zdroj:https://en.wikipedia.org?pojem=Brake_specific_fuel_consumption
Text je dostupný za podmienok Creative Commons Attribution/Share-Alike License 3.0 Unported; prípadne za ďalších podmienok. Podrobnejšie informácie nájdete na stránke Podmienky použitia.

---



---

www.astronomia.sk | www.biologia.sk | www.botanika.sk | www.dejiny.sk | www.economy.sk | www.elektrotechnika.sk | www.estetika.sk | www.farmakologia.sk | www.filozofia.sk | Fyzika | www.futurologia.sk | www.genetika.sk | www.chemia.sk | www.lingvistika.sk | www.politologia.sk | www.psychologia.sk | www.sexuologia.sk | www.sociologia.sk | www.veda.sk I www.zoologia.sk

---

kW	HP	Year	Engine	Type	Application	lb/(hp⋅h)	g/(kW⋅h)	Efficiency
48	64	1989	Rotax 582	gasoline, 2-stroke	Aviation, Ultralight, Eurofly Fire Fox	0.699	425[1]	19.3%
321	431	1987	PW206B/B2	turboshaft	Helicopter, EC135	0.553	336[2]	24.4%
427	572	1987	PW207D	turboshaft	Helicopter, Bell 427	0.537	327[2]	25.1%
500	670	1981	Arrius 2B1/2B1A-1	turboshaft	Helicopter, EC135	0.526	320[2]	25.6%
13.1	17.8	1897	Motor 250/400[3]	Diesel, four-stroke	Stationary industrial Diesel engine	0.533	324	26.2%
820	1,100	1960	PT6C-67C	turboshaft	Helicopter, AW139	0.490	298[2]	27.5%
515	691	1991	Mazda R26B[4]	Wankel, four-rotor	Race car, Mazda 787B	0.470	286	28.7%
958	1,285	1989	MTR390	turboshaft	Helicopter, Tiger	0.460	280[2]	29.3%
84.5	113.3	1996	Rotax 914	gasoline, turbo	Aviation, Light-sport aircraft, WT9 Dynamic	0.454	276[5]	29.7%
88	118	1942	Lycoming O-235-L	gasoline	Aviation, General aviation, Cessna 152	0.452	275[6]	29.8%
456	612	1988	Honda RA168E	gasoline, turbo	Race car, McLaren MP4/4	0.447	272[7]	31.6%
1,770	2,380	1973	GE T700	turboshaft	Helicopter, AH-1/UH-60/AH-64	0.433	263[8]	31.1%
3,781	5,071	1995	PW150	turboprop	Airliner, Dash 8-400	0.433	263[2]	31.1%
1,799	2,412	1984	RTM322-01/9	turboshaft	Helicopter, NH90	0.420	255[2]	32.1%
63	84	1991	GM Saturn I4 engine	gasoline	Cars, Saturn S-Series	0.411	250[9]	32.8%
150	200	2011	Ford EcoBoost	gasoline, turbo	Cars, Ford	0.403	245[10]	33.5%
300	400	1961	Lycoming IO-720	gasoline	Aviation, General aviation, PAC Fletcher	0.4	243[11]	34.2%
5,600	7,500	1989	GE T408	turboshaft	Helicopter, CH-53K	0.4	240[8]	33.7%
7,000	9,400	1986	Rolls-Royce MT7	gas turbine	Hovercraft, SSC	0.3998	243.2[12]	34.7%
2,000	2,700	1945	Wright R-3350 Duplex-Cyclone	gasoline, turbo-compound	Aviation, Commercial aviation; B-29, Constellation, DC-7	0.380	231[13]	35.5%
57	76	2003	Toyota 1NZ-FXE	gasoline	Car, Toyota Prius	0.370	225[14]	36.4%
8,251	11,065	2005	Europrop TP400	turboprop	Airbus A400M	0.350	213[15]	39.6%
550	740	1931	Junkers Jumo 204	diesel two-stroke, turbo	Aviation, Commercial aviation, Junkers Ju 86	0.347	211[16]	40%
36,000	48,000	2002	Rolls-Royce Marine Trent	turboshaft	Marine propulsion	0.340	207[17]	40.7%
2,340	3,140	1949	Napier Nomad	Diesel-compound	Concept Aircraft engine	0.340	207[18]	40.7%
165	221	2000	Volkswagen 3.3 V8 TDI	Diesel	Car, Audi A8	0.337	205[19]	41.1%
2,013	2,699	1940	Deutz DZ 710	Diesel two-stroke	Concept Aircraft engine	0.330	201[20]	41.9%
42,428	56,897	1993	GE LM6000	turboshaft	Marine propulsion, Electricity generation	0.329	200.1[21]	42.1%
130	170	2007	BMW N47 2L	Diesel	Cars, BMW	0.326	198[22]	42.6%
88	118	1990	Audi 2.5L TDI	Diesel	Car, Audi 100	0.326	198[23]	42.6%
66	89	1992	VAG 1.9TDI 66kw	Diesel 4-stroke	Car, Audi 80, VW Golf/Passat	0.324	197[24]	42.8%
368	493	2017	MAN D2676LF51	Diesel 4-stroke	Truck/Bus	0.314	191[25]	44.1%
620	830		Scania AB DC16 078A	Diesel 4-stroke	Electricity generation	0.312	190[26]